Hello, friend.
I'll come back in a couple of years with you, I have discussed about Laravel developed addiction,
all that features right now.
I have already registered some of the users.
Right now, if you want to lock in with this new user I have created as the administrator will, dot
com and then password as you give me one, two, three, four, five.
And now if you locking, then you see to the dashboard.
Right.
So as I told you, friend, that is the file is texture.
And if you go to our project, actually, if you go to our Web crowd into the Web browser, you can
see Winnin installed the full authentication system.
That is the middleware.
There is a default on the middle and that is all out of the allowed into the functionally active state
and one of the few base.
So that is the view and the dashboard.
That means if you go to our view, that means, you know, views into the views area.
That is our dashboard is now working.
So that's the dashboard area here.
So that is our dashboard page.
So now in this video, I want to do I want to read this data.
So I have already created two of these users right now to do to get our these user data.
Yeah.
This user that I want to get and I want the visibility in particular that area.
So that is the portion I have already discussed about the things we do here.
If you put anything so I know better.
I don't need this, Dave, OK?
I don't need this, Dave.
I also want to go and remove it.
Then it should be actually clean.
So here in particular, that area, I want the visibility.
If you look at the Savol and now if you refresh it now you can see this data is visible on here.
So now I'm going to add one to the table, then better to use that bootstrap.
So if you want to use that bootstrap, go to that bootstrap official site.
So that is the official site I want to do want to go there and now go to that documentation and all
the documentation here.
There is no cost for the bootstrap and the GSA is.
So first of all, I want to do want to add all that success because of follow to use that bootstrap
code.
So for the reasons I copy it.
OK, copy that access code.
And now if you want to add it, as I told you, and install full authentication system, there is a
layout and the tablet.
So that is the tablet here.
You have to add all that to your file so you can see that is by default on the CSA style file.
So now I want to add that is that means our bootstrap file in particular that area, and also want to
add that Jaysus file.
Then you can actually use all that bootstrap features in our project, but I copy it.
And also before this body, OK, before this body, I want to add that our all the jesca that mean the
JavaScript code.
OK.
So now we can actually use it to make sure you add both of these in your airblade that layout into the
tablet.
No like the because Savol so here in particular that area that was in our area here.
I want to add one of the table.
If you go to that bootstrap and the bootstrap, if you go to that component and here I want to find
out the table.
So that is the table, the the form that is in our content and the content here.
Consider the table.
So now I to do I want to get like this table for discussion purposes to use this table.
So that is all that bootstrap code.
OK, that means that is all that bootstrap code.
I copy it so simply copy it.
And now here.
But I don't I don't know Dave.
I take one of the Dave so I finish that Dave and Herakles that Dave so that Dave OK, so into the Davidia
and want to create on the class.
I did one of the most strip class and then have another bootstrap class as a container.
So I made it as a container and also take another Dave.
I think that day and also I don't want to close it.
That is a close, Dave, and here I would take another class and I want to create another class.
And I named it as a rule.
OK, there is a rule plus perfect so that these are two of these.
So that is our one.
And then our rule class in particular, that area.
And on to a that is on the past hour, this table, which I have already copied from our bootstrap,
that is from here.
I copy this table and now I want to learn to add this table.
OK, so now let's check this out.
Everything is perfect, working or not.
Now, if you look at this table and now if you go your home page, that means the dashboard click the
refresh.
Yes.
You can see it's not perfectly getting our bootstrap.
So here, if you want to check it, that booster is working on not like if you go to your app and from
here if you remove this access.
OK.
So if you reveal this yourself now, if you can save all and now if you refresh it now you can see there
needs to be a display like that way.
So for the reasons, make sure you add these boot straps counseling.
So I have already added now clear save all.
And now if you refresh it now because it's not perfectly working.
So now one to do.
I want to get our this data.
I want to get our these two of these user data and the visible light on here, OK.
So if you want to do that works right now, I only want to do want to take one table that means want
to be.
So that is our ablate.
We don't need these 14.
We don't need this.
So in the dashboard that is out there, I only want to take one here because here I want to make it
as a dynamic.
So here you can see I only take that one beer.
OK, so first of all, here I want to do all the visible our serial number that the serial number on
the visible, on the visible, our user name, that means that will be our user name will be visible.
User e-mail will be visible.
So I want to display that user e-mail, whatever the data actually you want to add.
So that is our field name as a name.
I want to display that email address and also on the display that this field has created at.
OK, so that is I'll take another one as a created created at that will be our all that field so no
one to do on to visible it.
I want to get all that our name email and that created ad data from the database.
So friend, if you want to create with this data you can read or you can insert it to have the two different
types of where you can actually do that work.
One is that you're looking at in another is the query builder.
So one of the things you choose with this query builder, you can also create the keyword application.
That means you can create this data.
You can read this data from the database.
You can update this data.
You can also delek this data.
So you can use that you're looking into Aughrim rather than you can also use that it be.
So I will discuss both of these with you.
Then everything will be very clear.
OK, friend, don't worry.
So as I told you, friend, everything I want to share with you what is thinks is related.
So right now, that's the data.
I want to go on to get this data from our this table.
That means our user to rely on the visible visibility in our database.
So if you want to pass this data from the database and if you want to pass this data on here to have
already in our webroot into the Web browser, you can see that it's already get this data and return
this data into the dashboard.
Right.
That means the return our this dashboard page.
So here I want to do I want to get this data.
I want to pass this data into the dashboard piece.
I'll give friends.
So how can do that work.
I show you like for doing this.
First of all, we have to do we have to you can use that.
You can do our names if you want you want to use that, you look at one and then there is actually a
different process.
So because both of these with you then everything will be very clear to you.
So first of all, I want to turn to take one of the variable of the variable you want to take.
I take it as a users and users here.
I want to do want to I have already added one of the default user model, like we installed a lot of
of well, actually provided by default, one of the user that is a user to be OK.
That is the model.
So now with this model, I want to do want to get this data.
OK, so from here that is our database.
So that is a user table.
So with this model, as I told you, when you read any data, when you work with anything with the data
base, then our model will be work.
OK, so with this user model, I want to do want to get this data.
So for the results here, we have to do you have to add that user model?
So I use that user, that means our user model and font of the user model, I don't want to get all
the data.
So for the reasons I take it as an all OK event.
So here I take it as all data.
So if you use that user, then you have to do have to also load your this model.
That means this model in particular, that area.
So here I first of all, I don't want to use it.
That means that I use and that is in our app.
So that is, you know, sorry, that is in our app.
And then after that there is an app and then the models and after that model that is our user dot.
Right.
So now I name it as a models.
So that is a model.
And after that model there is a back.
And then that user that is our user model I hope is very much clear to your friend.
So make that your use this user.
OK, so I use this user and now also I use it on here.
So from here I get all the data from our database that needs to from our user.
That means for our user table, I get all the data and take this data with this variable as a user.
So right now, all that our data is in all this variable area as a user area.
Right.
So now I don't want to pass it in or which page.
I want to pass it in our these dashboard bays.
Right.
Because here I want to do the visible this data on here.
So if you want to visible it.
So here we have to do we have to pass all the user data.
I have already get all the total user data.
Take that things with this variable.
So now we have to do we have to pass it.
So if you want to pass it, they have also another command line as a compact.
So we have to do we have to compact it.
OK, so we have to compact this user data.
So that is our view page.
So into the view area after this, I put as a comma and I want to turn to compact.
So there is another option as a compact.
And with this compact, I want to pass all that our user data.
So right now we can actually able to access are all that user data in our these dashboard.
I hope it's very much clear to friend.
So that is the main Bassekou structure.
Friend, how much is it?
Is that you just floor that is tab.
Just remember that part.
I get all the data from all the user, take this data with this variable and then I simply pass all
the data in our dashboard.
So if you want to pass it, you have to pass it with the compact and then our dalil that user variable
data.
OK, so now I to do on the visibility in our dashboard pace.
So now go to your dashboard.
That means in our view and that is our dashboard page here.
I want the visible second, the visibility.
So here we have to do we have to load one of the forest, look OK with the families, do we can actually
do that work?
So as I told you, friend, right now we are using that blades in text into the Blethyn text if you
use that for this, too.
But you have to write down the for each.
So that is our each, OK.
And for each area we have to do we have to first of all get this data.
So from here I pass all the data as users right now I want to do want to add this as a with this dollar
as its users users as I want to visible it with a different name, I name it as it user.
You can use that role, whatever that name.
OK, so now with this user you can actually use it.
So I make it as a user and as users and after that there is a tier I want to go on to finish that our
first loop.
So make that you finish it so that it will and for each block that will be at the end for it.
So now with this user, I want to do and visible all the database field like first of all, that is
our name.
So that is the name I want.
The visibility was so right now we are using that our syntax.
So that is the syntax.
As I told you, if you want to display any data, you have to add the Double-Click bucket and into this
position with this user.
I want on to access our this filename.
And if you go to our database into the database or this filename name as a name, this will name as
an email and also another one as a created underscore at our good friend.
So now I want to do and to add both of this, that means here it will be as a database filename, as
a name and better.
I copy it.
I want to do want to add another two of this.
So with this user, not that users, OK, so because of all the foreach, we have to take all the data
from our phase and we are just name it as user.
So with this user I under the name, I only display downunder filename and the filename as email, OK,
and the filename is email and there is a created that.
So if you go to a database or filename as a created underscore at OK, so now I name it as a created
created underscore at.
So that will be as a created attfield I.
And it's very clear to you, so now if everything OK, it should be working out because I save all I
can to save all.
And now if you go your side and now if you refresh it, yes, you can see friend.
Now the serial number, there is a crazy name that is this name actually comes from our database.
So you do the database, you can see the name Kazarian email address.
So it's perfectly getting the data that Karzai Azarian is not displayed that email address and also
display that created that.
And there is a serial number.
So if you want to update that serial number automatically, it'll be increased as a one to you can do
that work.
Very easy way like here.
First of all, I want to do I want to take one of the PSP like here, I take it as a PSP and the area
I take one of the variable as a dollar, like, OK, whatever you want.
So that is very much common.
Or every programmer can use that as a I as a variable.
So make it as one.
OK, so that means it will be studied from once.
If you want to start it from the zero you can make it as a zero.
So right now it's OK with me.
And now this variable, this variable I want to do want to add this on here.
So with the double bracket, with this variable, I want to go on to make it as a plus.
Plus, that means it will be automatically increment because of all here.
Right now we are into that one of the foreach loop.
Right, friend.
So I want to do and to increase it.
So that's all you have to do.
Now click on the save all.
And now if you refresh it now, this is the perfect it's not better that one and there is our another
one as a tool and also there is a creator that.
So this is the format if you want to change it.
The right now we are using that e looking for him.
Right.
See did you look into our M because of all here.
You can see we are using that.
That is actually the format as you look into what information with this look and what we get our D data.
So here, if you want to update this part, that it is created but have also another function that is
also on the default function in Laravel.
If you want to change the date format, there is another one of the different for human like the for
humans.
So that is also one of the functions.
So if you use this function, then our D format will be totally changed.
I show you like if you click to save all, I updated that others for humans and now if we can get a
refresh.
Yes, you can see for now sparkies successfully it now showing as a six forty six minutes ago and I
have created that user as a 32 minute ago.
OK, so here we successfully updated that part.
And now if you go to that log out, I want to create new resistor user and name it as a test and also
to be as a test at the original dot com.
I put that the model three, four, five.
Give me one, two, three, four, five.
OK, now clear the register.
Yes, you can see we are now ready start again.
And now we are logging with our different user and that is our user name is you.
Serial number is visible, name is visible, email address is visible and also showing our visitor that.
So now it's created that before that one second ago.
So that is our new user.
So now also here, if you want to update it like here, if on the display as a high end user is already
logging this user name, if you want to visible and you can also visibility also if you want to display
the total count, that means how many users you have, you have you want the visible need, in particular
that area.
You can visible it, I show you.
So it's very much easy process, friend.
If you actually practice, everything should be very clear to you like that is the dashboard.
Right?
So this dashboard text is not visible on here.
So that is actually appropriate positions right now.
I want really remove it.
So here I want to do I want to take one of the I just high, OK, high and then I want to do the visible
our user.
So I better take on the PAETEC.
OK, that means the ball back into the Baltic area.
I want to use that our oth I have already installed the default authentication system on install.
It is also provided another default auth.
So with this or you will get all that your user details.
So with this, what I want to do on the access that is all the default value, I want to use that user.
OK, user.
Which user will you want to visible.
I want to visible our this or what that means.
Which user already login.
OK, that is which user right now logging this user name.
I want the visible.
So this user name it means that is Ekler Phelim.
I want visible this name like that in this user fee in name only visible.
So that will be as a name I hope it's very.
It's clear to friends now should be displayed as a high and which user is already logged in and this
user name will be visible.
Now, let's check this out if you're not looking, save.
All right.
Now I'm logging with the test, right?
So I'm logging with the test.
So if you refresh it, there is another one as the test.
So now if you click on refresh, yes, you can see it now showing as high and then its display as a
test.
Right.
So right now, I'm logging with this user as a test user for the reasons to display the test.
And here also, if you want to display that means the count.
That is how many users you have.
If you want to display, you can also displayed better.
I want to do after this.
OK, after this I take another V v tech.
That means the ball tag.
And I also want to put on a restyle as to why at least trying to put one of these dial.
And this is tell.
I want to make it as a float, OK, so flawed.
And I make it flawed as right.
So I make it as a flawed tried and it'll be display and possibly display as a name and name it as a
total OK, total users.
So this step of one of the total users data on the visible and also right here, if you want to display
that along the ground, you can display to this misspend I take one of this plan and also I finish that
is Ben.
OK, finish that is open.
And now in particular, that area I want to put on the class.
So that is all the default actually class.
So I want to be able to use it as a party redzone and then badguy danger.
Danger.
OK, you can make it as a huge success in four.
That is different type of classes.
So that is all that booster class.
Now do you see that danger that means will be at the rate and in particular that I want to display the
count?
OK, I want to display the count with the double curly bracket and they have also another option for
the count.
So I want to split the count and count what count our user.
OK, so I have already get all that our data, you know, Webroot.
I have already get all the data with this user so its users, we can actually get it.
So no one did want to pass it.
OK, so right now I want to pass it.
That is a users.
But here you can see when you use it in order for this loop.
I have already changed that name as users, as users.
Right now we are not into the forest loop.
We are outside of this for this for the reasons here.
We have to use it as a users, OK, because of all from here, I pass it as a users.
So now successfully updated that count.
Now, let's check this out if we now, because the Savon.
So that is all that are called no, refresh it.
Yes.
You can see it's not perfectly visible.
Our total users and they have the three users right now.
It's also counting all that users are now consistent, showing as a true user.
So right now from here, if you click on the log out, if you want to log in with the admin, so that
is our admin, you do me one, two, three, four, five.
Now click a logging.
Yes.
Now I can see it's not showing our chi karzi.
So right now I'm logging with the causes, get all the data from our database and also to display our
total user.
So friend, I hope you enjoyed very much how much easily you get all the data from the database and
how visible a often here I'm using as the eloquent you are.
I'm right.
So if you want to get this data with using that query builder, how can do that work?
In our next video, I will show you that things with a live example.
So thanks for watching and I'll see you in the next video.